1. Product Introduction
Grade 2 titanium sheet is pure titanium sheet.
The differences between Grade 1 and Grade 2 are as follows:
1. Impurity content: Grade 1 is less than Grade 2.
2. Mechanical strength: Grade 1 is greater Grade TA2.
3. Hardness: Grade 1 is better than Grade 2.
4. Plastic toughness: the toughness of Grade 1 is weaker than that of Grade 2
According to the above four points, customers can make a preliminary choice of materials, which is Grade 2 titanium sheet or GR1 titanium plate
2. Product parameters
Chemical requirements of titanium sheet
N | C | H | Fe | O | Al | V | Pa | Mo | Ni | Ti | |
Gr 1 | 0.03 | 0.08 | 0.015 | 0.20 | 0.18 | / | / | / | / | / | bal |
Gr 2 | 0.03 | 0.08 | 0.015 | 0.30 | 0.25 | / | / | / | / | / | bal |
Gr 3 | 0.05 | 0.08 | 0.015 | 0.30 | 0.35 | / | / | / | / | / | bal |
Gr 4 | 0.05 | 0.08 | 0.015 | 0.50 | 0.40 | / | / | / | / | / | |
Gr 5 | 0.05 | 0.08 | 0.015 | 0.40 | 0.20 | 5.5~6.75 | 3.5~4.5 | / | / | / | bal |
Gr 7 | 0.03 | 0.08 | 0.015 | 0.30 | 0.25 | / | / | 0.12~0.25 | / | / | bal |
Gr 9 | 0.03 | 0.08 | 0.015 | 0.25 | 0.15 | 2.5~3.5 | 2.0~3.0 | / | / | / | bal |
Gr12 | 0.03 | 0.08 | 0.015 | 0.30 | 0.25 | / | / | / | 0.2~0.4 | 0.6~0.9 | bal |
Tensile requirements of titanium plate
grade | Tensil strength(min) | Yeild strength(min) | Elongation(%) | ||
ksi | MPa | ksi | MPa | ||
1 | 35 | 240 | 20 | 138 | 24 |
2 | 50 | 345 | 40 | 275 | 20 |
3 | 65 | 450 | 55 | 380 | 18 |
4 | 80 | 550 | 70 | 483 | 15 |
5 | 130 | 895 | 120 | 828 | 10 |
7 | 50 | 345 | 40 | 275 | 20 |
9 | 90 | 620 | 70 | 438 | 15 |
12 | 70 | 438 | 50 | 345 | 18 |
Process | |
Hot rolling | a rolling process carried out at a temperature higher than the recrystallization temperature. |
Cold rolling | a rolling process in which the plastic deformation temperature is lower than the recovery temperature. |
Annealing | A metal heat treatment process in which the metal is slowly heated to a temperature for a sufficient period of time and then cooled at a suitable rate (usually slow cooling, sometimes controlled cooling). |
Pickling | The article is immersed in an aqueous solution of sulfuric acid or the like to remove a film such as an oxide on the surface of the metal. It is a pre-treatment or intermediate treatment of electroplating, enamel, rolling and other processes. |
3. Our Factory
The predecessor of Tai Cheng Group, Baoji Taicheng metal Co., Ltd., was established in 2005. After more than 10 years of hard work and development, it now has Baoji Taicheng metal Co., Ltd., Baoji New Tai Cheng Metal Clad Material Co., Ltd., Baoji Titanium Pressure Vessel Equipment manufacturing Co., Ltd., Fujian Sanqin Titanium Industry Co., Ltd., Sichuan Taicheng Titanium Industry Co., Ltd and so on, many subsidiary companies.
Taicheng Group specializes in R & D, production and deep processing of layered metal composites, titanium and titanium alloy series metal materials.
4. Certificate
Patent
5. Exchange and study with foreign friends
6. FAQ
1.Q: Could you accept customized service?
A: Sure , we could customize according to your requirement.
2.Q: Would you provide sample service?
A: Of course. Samples available.
Hot Tags: grade 2 titanium sheet, China, manufacturers, suppliers, factory, customized, wholesale, buy, price, quality, quotation, pricelist, in stock, for sale, made in China, 0 3mm Thickness Gr2 Pure Titanium Sheet, Gr12 Titanium alloy Sheet, 0.3mm Thickness Gr2 Pure Titanium Sheet, Thick Grade 2 Titanium Sheet, Industry Medical Grade7 Titanium Plate, Gr12 Cold Rolled Titanium Plate
