Titanium steel composite plate began in 1962 when the production method called explosive composite method, by virtue of the explosion of explosives and can be joined a method. 1986 developed the hot rolling method, thick plate rolling method. 1990 and developed a continuous hot-rolled strip coil production method, which mainly refers to the production of thin plates.
Titanium steel composite plate appearance of the quality problems of improvement methods:
1、Adjust the height of the big chain of the cold bed to ensure that the chain runs on the same level, and replace the damaged chain in time.
2、Improve the material of the furnace bottom leather, replace the original heat-resistant alloy furnace bottom with an asbestos mixture of car tubes.
3. Standardize the use of lifting steel plate hooks to prevent artificial scratches and rib injuries. After pickling the steel plate, use the plastic hook to lift the steel plate.
4. Check whether the straightening leather is bonded with iron scales before producing titanium steel medium plate, and timely finishing.
5. The steelmaking process uses coarse grinding wheel grinding billet appearance, and then uses fine grinding wheel grinding to reduce the depth of the billet exterior abrasion, and then prevent the occurrence of abrasion marks on the steel plate exterior after rolling.
6. Select a higher temperature in the heating stage to ensure that the billet is burned evenly and thoroughly, use a lower heating temperature in the even heating stage, and when the heating furnace is overhauled, promptly polish the oxidation bond of the slider on the heating furnace slide and replace the damaged slider.
7. On more than 10mm thick standard plate rolling, to be bitten into the mill after the steel plate should quickly open the splint, reduce the clash between the splint and the edge of the steel plate, to prevent the edge of the spurs and other pressure into.
Through the above introduction, I believe you have a new understanding of the causes of quality problems in the appearance of titanium steel composite plates and how to solve them. Baoji Taicheng Clad Metal Materials Co., Ltd as a titanium steel clad plate manufacturer, can provide you with the best quality products, welcome your consultation!
