1) Apllication: Electic tank
2) Dimension: 1000*1000mm
3) Bonding method: Explosion
Description：
Titanium steel composite plate 1+3 is used for electrolytic cell products, mainly for stamping small circular pieces, and then welding the small circular pieces to the electrolytic cell. By utilizing its anti-corrosion and wear-resistant characteristics, it also increases the strength and service life of the equipment,
Titanium has low density, high strength, and high specific strength.
The density of titanium is 4.5g/cm ³, which is 57% of that of steel, and its strength is three times greater than that of aluminum.
Corrosion resistance: Titanium has better corrosion resistance in oxidizing media than in reducing media.
Good heat resistance, titanium alloy still maintains good mechanical properties at around 500 ℃.
Good low-temperature performance, some titanium alloys still have good ductility and toughness at low temperatures.
Non magnetic, titanium is used for submarine shells and will not cause mine explosions.
Low thermal conductivity compared to titanium.
The elastic modulus is low, and the elastic modulus of titanium is only 55% of that of steel.
The tensile strength is close to the yield strength.
Metal composite material technology can leverage the advantages of each component material, achieve optimal allocation of each component material resource, save precious metal materials, and meet performance requirements that cannot be met by a single metal. Taking stainless steel steel composite plates for pressure vessels as an example, the base layer uses general carbon steel (Q245R, Q345R, etc.) with good mechanical properties, and the cladding uses stainless steel (304, 316L, etc.) with good corrosion resistance. The two are usually welded together by explosion, requiring only a few millimeters of expensive stainless steel, which greatly saves costs and hardly changes the various mechanical properties of the substrate. It can not only replace imports and fill domestic gaps, but also has a wide range of applications, good economic and social benefits, and is easy to obtain support and assistance from all aspects.
The development of stainless steel composite materials has always been a high-tech project actively supported and advocated by the National Development and Reform Commission and the Ministry of Science and Technology.
Due to the functional performance, low cost, and wide application range of heterogeneous metal composite materials, the development potential of traditional metal composite materials has been enhanced. With the strengthening of national environmental protection industry policies, the application of rare metal composite materials in power flue gas desulfurization equipment continues to grow. At the same time, the localization of investment in the chemical industry has greatly accelerated, providing good development opportunities for the development of rare metal materials.
The support of national industrial policies, high technological barriers, and the demand for industrial upgrading have provided broad space for the development of the industry. Metal composite board is a board made by covering one layer of metal with another metal, which achieves the effect of saving resources and reducing costs without reducing the use effect (anti-corrosion performance, mechanical strength, etc.).
Hot Tags: titanium clad plate for electric tank, China, manufacturers, suppliers, factory, customized, wholesale, buy, price, quality, quotation, pricelist, in stock, for sale, made in China, GR12 Titanium Clad Steel Plate for Pressure, Titanium Clad Steel Plate For Chimney, clad pressure vessel, clad plates manufacturers, explosive cladding process, GR2 Titanium nickel composite plate
