The quality of products such as seal clad heads is related to the state of the entire equipment, so not only need to pay attention to when using and installing, but also in normal storage. Due to the low average temperature in winter, manufacturers will present many difficulties in the processing process. The greater the thickness of the product, the greater the pre-variable value, the tensile strength and compressive strength of the stainless steel plate will develop significantly, the strength value will increase, the plastic deformation resistance will decrease, and a significant cold work hardening condition will occur.
When storing the clad head, pay attention to rust. The corrosive layer should be treated first. After the clad head and equipment are welded, immediately clean the surrounding welding penetration and splashed contaminants, and carry out PT inspection and surface pickling passivation. When storing, pay attention to prevent rain or infiltration of residues. Store in a dry, naturally ventilated room or a workshop with temperature and humidity adjustment. Store the materials together.
There are bleach and various acids on the surface of the stainless steel clad head. Please rinse it immediately with water, then soak it with ammonia solution or neutralized carbonic acid sodium bicarbonate solution, and clean it with neutral detergent or warm water. If there is dust on the surface, clean it in time, and avoid collision and rubbing during transportation.
In order to extend the service life of the product, maintenance is an indispensable step. Baoji Taicheng Clad Metal Materials Co., Ltd is a professional clad head manufacturers. We have an independent clad head factory that can provide you with various materials and various shapes of clad heads. If you have any questions or needs, please contact
Sales Manager: Mr. Yang
Email: yangchen@bjtcjs.com
